Kelsa 19RH-III
- Lightweight Durable Design
- 2 Roller Single Grip Design
- Cypress 6.0 Controller System
APPLY FOR FINANCING (USA)
Overview
3 KNIVES, 2WD, SMALL SIZE. Equipped with a third rear delimb knife and a new modular design, this lightweight workhorse is designed for first or second thinning. Best suited to small carriers with minimum of 65-80 kw (87-107 hp) engine power. Requires 150-200 LPM (40-53 gpm).
Specifications
METRIC |
IMPERIAL |
||
DIMENSIONS |
|||
| Weight | 680 kgs | 1500 lbs | |
| Degree Of Rotation | 270° | ||
DRIVE |
|||
| Number Of Drive Rollers | 2 | ||
| Motor Size (4 Motors) | 325 cc | ||
| Maximum Drive Roller Opening | 42 cm | 16.5" | |
| Feed Speed | 6 m/s | 16.4 ft/s | |
DELIMB |
|||
| Maximum Delimb Opening | 48 cm | 18.9" | |
BUTT SAW |
|||
| Motor | 45 cc | ||
| Bar Size | 64 cm | 25" | |
| Chain Pitch | 0.404" | ||
| Tensioning | Manual | ||
| Laser Find End | YES | ||
CARRIER REQUIREMENTS |
|||
| Carrier Size (Tracked) | 12-15 Ton | ||
| Maximum Pressure | 28 Mpa | 4060 psi | |
| Optimum Flow @ Pressure | 150-200 LPM | 40-53 gpm | |
| Engine Power | 65-80 KW | 87-107 hp | |
MEASURING |
|||
| Measuring System | Cypress Robotics 6.0 Controller | ||
| Length | Contactless Magnetic Controller | ||
| Diameter | mA type Contactless | ||
| Saw Sensors | Magnetic Proximity Sensor | ||
Financing (USA)
Balboa Capital provides financing for clients based in the USA. If you'd like to apply, please click on the link below.
